Basic Configuration

Home Back Next

During the basic configuration, the device is provided with all the parameters needed for communication. The device is registered on the network.

•	Start the configuration configuration software.

•	Select the type of configuration (usually IP).

NOTE:

The station you are configuring via H1 or IP has to be in the same network as the configuration computer. Stations connected behind a router cannot be discovered.

Configuration via H1 is only available if the Tani OSI-H1 Driver is installed.

Configuration via TCP/IP or H1

•	The Select a Station in Your Network dialog box appears. The new device is displayed together with its MAC address.

•	From the MAC address, you can determine the station to be configured. Double-click the station or select it and then click OK.

•	The Station Parameters dialog box appears. Edit the settings and confirm your entries with OK.

•	The configuration is complete.

NOTE:

If you want to use both network connections provided by the device, both configurations should be configured.